The Safe Load is the only gooseneck ball with a built-in scale that shows tongue weight at the hitch. No more guesswork or "I think it's fine." It tells you when to adjust so your trailer's balanced before you hit the road.
Built from corrosion-resistant stainless steel, this ball is made to handle long hauls and rough weather.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we can gonna take a look at this Weigh Safe Safe Load 2 5/16" gooseneck ball for the B&W turnover ball hitches. This has a 30,000 pound gross towing weight capacity. Now this is gonna make it very easy to weigh your gooseneck trailer so that you can skip the weigh station and get right on the road. Basically what you'll do is replace the ball from your B&W turnover ball with the Safe Load ball. Basically once you install it, then just hook up your trailer and then check the built in scale right here for an accurate tongue weight.
And just to show you that scale, we're gonna zoom in. You can see there's how that scale will register, what your tongue weight is, and then you can adjust your load on your trailer until you're balanced and within the safe limits of the 15 to 25% tongue weight capacity. Now it does include everything shown here on the table. It'll include the Safe Load gooseneck ball, the rubber cap, and the storage case. Now this drops into place in your hitch and it'll remove for storage just like your current ball.
So once you remove it, you can just pop the included rubber cap right here into your gooseneck hitch hole to prevent any dirt or grime from getting in that hole. And then you can safely stow the ball into this durable, hard-sided case. Now it is made of high-strength, rust-proof stainless steel. It is V-19 and J-2638 certified for safety. As we mentioned, and it's even stamped on the top, gross towing weight capacity of 30,000 pounds.
Now you do wanna remember that your capacity is limited to that of your hitch and your vehicle. Vertical load limit capacity of 7,500 pounds, ball size of 2 5/16". Now one note I do wanna mention, this ball will not fit the B&W turnover ball gooseneck hitch for the Toyota Tundra or the hitch for the Ram. And again, just to store this, what you'll do, let's just move this over, slide this open, open that up, and you'll be able to see how it's designed just for this form fit. And then you can, even if you're not using the rubber plug, you can actually put it in there and then you can close it, slide those together, and I have everything in one nice storage case.
Now also, always remember if you have any questions regarding this product or any of our products, please don't hesitate to contact us via phone, chat or email or if you've purchased any product from us, please send us pictures of it being used in your application 'cause we'd love to see how that product's working out for you. But that's gonna do it for a look at this Weigh Safe Safe Load 2 5/16" gooseneck ball for the B&W turnover ball hitches.
works as advertised, no more guessing i nvolved!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.